ETK 800 Active Body Control

Creator of ETK Comfort Plus here!​ ​ I couldn't sleep this weekend, so I decided to make a fully active suspension for the ETK 800 similar to Mercedes's Active Body Control. No it doesn't have road scanning but it does prevent your car from diving, squatting, and rolling. ​ Features: Active real time roll and pitch correction Variable ride height settings (via the tunings tab) Two ride height presets (high and normal) Active rear wheel steering (depending on the drive modes) Mercedes E-ABC style curve mode Mercedes style free driving assist (Bounce Mode) Fully active dampers Adaptive swaybars (optional) UI App to see the Active Suspension Activity Auto Leveling! (Only works in neutral or park, while stopping, and at a flat surface) Fully integrated with the car's infotainment screen - In comfort mode, big and small bumps will practically feel the same. It's like you're hovering slightly above the ground! - Sport mode, and etc will make the car handle flat, even without swaybars! Please Read the Following: Check your keybinds if the controls are not showing. If the mod doesn't work, try clearing the cache or disabling other mods. I repeat DISABLING OTHER MODS.​ Note:​ Please wait for the self leveling system to settle after spawning / respawn Equipping this part will make the car heavier. Everything has its pros and cons. You wouldn't win any races but at least you'll cross the finish line in comfort lol. Auto Leveling will Automatically Calibrate on First Spawn. If the ride height sits weirdly (ex. too high) try to recalibrate. Recalibrating the Self Leveling: Step 1: Stop the Car. Step 2: Straighten your Steering Wheel. Step 3: Put it to Neutral. Step 4: Release your Brakes. Step 5: Set the Ride Height to High. Step 6. Set the Ride Height to Low. For further information, read the changelog at the bottom of the page!​ How it works:​ It has a controller for each corner that adjusts compression, extension, and stiffness based on the car's g-force in real time. When braking, the controller lifts the front end and lowers the rear to help it stay flat. It works exactly the opposite when accelerating. Similarly, when taking corners, the outer side lifts but it also stiffens, while the inner side lowers. At high speed, the spring will be stiffer and the ride will lower gradually up to 160kph. The active dampers also react based on the gforce, and speed of the car (in comfort mode). It also reads the current level of vibrations. If it detects a harsh bump, it will stiffen up all four corners to mitigate body motion in comfort mode. HIGHLY RECOMMEND THE Luxury LWB ETK 800 Sedan - Rennspecht 8Re For the ultimate full-size ETK 800 sedan experience! https://www.beamng.com/resources/luxury-lwb-etk-800-sedan-rennspecht-8re.26155/ By: SubieBerry I've made my mod compatible with his. Default car: There are two ride height presets: - Normal Mode - High Mode (Max speed is 60kph) You can also adjust the ride height manually: You can control the base height and the high ride height multiplier for the front and rear. The system relies on the self leveling to control the ride height. Disclaimer: Setting the ride height too low (front below 25% and rear below 33%) is not recommended. There are also two curve modes: (Both speed is at 95kph) - Extra Curve Mode Disabled - Extra Curve Mode Enabled To equip this part, go over to the parts selection and under front suspension - rear suspension, equip the Active Body Control: Front and rear sway bars are completely optional User interface to show the ABC Activity (add them manually): Warning messages that shows on the infotainment screen: ​ Major Changelogs:​ ABC Demo Video: Known issues: - DM me if you've encounter any issues! Known mod incompatibility: - Universal Air Suspension by Ashmaker000 Thanks @Genuroid for pointing this out!​